To Next PageTo Next Page
Need help?Do you have a question about the Swann DVR4-4550 and is the answer not in the manual?
General| Brand | Swann |
|---|---|
| Model | DVR4-4550 |
| Category | Security System |
| Language | English |
Provides essential safety guidelines for operating and maintaining the product correctly.
Explains password creation and how to recover it if forgotten, using the MAC address.
Provides access to image adjustment tools like brightness and contrast.
Enables the creation of privacy masks to obscure specific areas of the image.
Sets the video resolution for Main and Sub streams (720p/Q720p).
Configures the frame rate for video streams, affecting smoothness and data usage.
Sets the maximum bitrate for video streams, impacting quality and storage.
Sets the video resolution for Main and Sub streams (1080p/Q720p).
Configures the frame rate for video streams, affecting smoothness and data usage.
Sets the maximum bitrate for video streams, impacting quality and storage.
Sets the video resolution for Main and Sub streams (3MP/Q720p).
Configures the frame rate for video streams, affecting smoothness and data usage.
Sets the maximum bitrate for video streams, impacting quality and storage.
Configures the specific areas within a camera's view for motion detection.
Sets the times and days for which motion detection is active.
Allows adjustment of motion detection sensitivity levels for different time periods.
Sets the times and days for which video loss detection is active.
Selects the communication protocol for PTZ cameras (e.g., PELCO-D).
Explains how to use directional buttons, speed, zoom, and focus controls for PTZ cameras.
Manages overwriting of the oldest video files to ensure continuous recording space.
Records a few seconds before an event occurs for better context.
Records for a specified duration after an event has occurred.
Enables audio recording along with video when a microphone is connected.
Allows searching and playing back recorded videos stored on the DVR.
Enables saving important video events to a USB storage device.
Allows making cuts in video for export to a USB device.
Saves selected video segments to a USB storage device.
Allows zooming into the timeline for precise control.
Zooms into a specific section of the video for closer inspection.
Covers general system settings like language, time zone, and display format.
Manages user accounts, permissions, and access levels for the DVR.
Provides options for system maintenance, including reboots and firmware upgrades.
Activates password protection for accessing system menus.
Configures the DVR to automatically reboot at scheduled intervals.
Allows updating the DVR firmware using a USB flash drive.
Checks for and prompts to install the latest available firmware updates.
Resets all system settings back to their factory defaults.
Enables exporting or importing system configuration files.
Selects the type of exceptions to be notified about (e.g., HDD Full).
Formats the DVR's hard drive, erasing all stored data.
Selects the video output resolution for HDTV or monitors.
Enables audio monitoring during Live View mode.
Selects the network connection type (DHCP, Static, PPPoE).
Sets a unique IP address for the DVR on the network.
Configures Dynamic DNS service for remote access.
