Need help?Do you have a question about the Sweet Sound Electronics Mojo Vibe and is the answer not in the manual?
General| Brand | Sweet Sound Electronics |
|---|---|
| Model | Mojo Vibe |
| Category | Music Equipment |
| Language | English |
Connects to amplifier or instrument, and previous effects.
Connects 9V DC power. Do not exceed 9.6V DC.
For optional speed pedal controller or passive volume pedal.
Matches effect output or adds a slight boost to bypassed signal.
Selects between classic Uni-Vibe chorus or vibrato sound.
Controls the depth or amount of the chorus or vibrato effect.
Switches the effect in and out; the Mojo Vibe is true bypass.
Lights and pulses to speed control when effect is engaged.
Controls the speed of the sweep in the Mojo Vibe.
Active FET buffer for clarity and response; switchable between modes.
Internal dip switch selects Vintage or Modern buffer modes.
Details on connecting a passive volume pedal for speed control.
Diagram and notes on using keyboard-style expression pedals.
Technical details including dimensions, weight, impedance, and current.
Wiring differences for expression pedals on early serial numbers.
Details on connecting a passive volume pedal for speed control.
Standard wiring for expression pedals on later serial numbers.
Contact information for rewiring the pedal jack if needed.
To Next Page