Swegon TBLZ-1-64 User Manual

GB.TBLZ64.190918
Swegon reserves the right to alter specifications.
www.swegon.se 1
TBLZ-1-64 connection kit installation,
GOLD
1. General
The TBLZ-1-64 connection kit is used to connect up to 3
MIRUVENT power roof ventilators or 1 chiller/heat pump
to one GOLD air handling unit. It can also be used as a
cable junction when the application requires more inputs
than those available on the GOLD unit's control circuit
card for COM1-3 and COM6-11 respectively. The connec-
tion kit consists of one cable adapter and one bus cable
(0.25 metres).
2. Installation
Mount the cable adapter on the DIN rail inside the electric
equipment cubicle of the GOLD air handling unit.
Enclosure TBLZ-1-73-1 (accessory) can be used to install
the cable adapter outside of the GOLD air handling unit’s
electrical cabinet.
14
Cable adapter
Bus contacts.
Wiring terminals

Swegon TBLZ-1-64 Specifications

General

Brand	Swegon
Model	TBLZ-1-64
Category	Cables and connectors
Language	English

Summary

General Information on TBLZ-1-64 Connection Kit

Installation Guide for TBLZ-1-64 Connection Kit

Electrical Connections for TBLZ-1-64 Kit

Connect MIRUVENT Ventilators and Chillers/Heat Pumps

Connects MIRUVENT ventilators or chillers/heat pumps to the GOLD unit using the connection kit.

Use as Cable Junction for GOLD Control Circuit

Utilizes the cable adapter as a junction for additional inputs to the GOLD unit's control circuit card.