www.swetrack.com
3
Installing the device
Connect the device to the wiring
SweTrack Lite+ is designed to connect directly to the electrical system of your vehicle.
SweTrack Lite+ works with power systems between 9 and 90 volts. lf you are unsure how
to install the product, contact a specialist. SweTrack accepts no liability for damage to
product or property resulting from improper installation.
In the product’s box you will nd a set of wires that are used to connect the SweTrack
Lite+ device tothe vehicle’s electrical system. Connect the wires to the device using the
round plug located on thewiring and the device.
1
Connect the device to the vehicle’s power system
Connect the black cable to a negative terminal, and the red cable to a positive terminal.
The orangecable can be connected to the ignition switch of the vehicle, which allows you
to receive noticationswhen the ignition of the vehicle is turned on or off. However, using
this cable is optional and is notrequired for the product to work.
2
The device is now ready for use
When you have installed the device in your vehicle, the device is ready to start
communicating withyou. However, you need to download the app and activate a data plan
before you can begin usingthe product
3
To Next Page
Loading...
