www.swetrack.com
4
Relay
SweTrack Lite+ has the ability to control external electrical equipment using a relay. This relay is not
included in the device and must be purchased separately. You can use the relay to control the
power supply to external devices in the vehicle, such as a starter motor. We strongly recommend
that you have a professional handle the relay connection. SweTrack is not responsible for any
damage to the product or property that may occur due to incorrect installation. Note that incorrect
use of the relay can damage both the product and property. SweTrack is not responsible for
damage that occurs through the use of the relay
To connect the relay, you should connect the yellow cable from the product's cable harness to pin
85 on the relay to enable Lite+ to ground the control circuit. Then, connect the remaining cables
according to the instructions provided with the purchased relay.
To Next Page
Loading...
