Swiffer Continuos Clean SYFM12 User Manual (English)

To Next Page

SWIFFER is a registered trademark of The Procter & Gamble Company, Cincinnati, Ohio

used under license by Project Air, LLC.

Filter

Replacement

Instructions

SYFM1 2

Continuous Clean

Air Cleaning System

™

Manufactured for:

Project Air, LLC

324A Half Acre Road

Cranbury, NJ 08512

800-221-6895

www.SwifferContinuousClean.com

Customer Service

If you have general questions about using or assembling this product,

please call World and Main customer service:

800-221-6895

Or you can visit our website www.SwifferContinuousClean.com

Continuous Clean

™

www.SwifferContinuousClean.com

Filter Life Indicator Pattern

For best results, replace your ﬁlter every 30 days,

or when ﬁlter life indicator pattern is visible on

the top of your ﬁlter.

Filter darkens as it captures particles from the air,

causing the Filter Life Indicator Pattern to become

visible. This indicates the ﬁlter is full and should

be replaced.

Filter Life Indicator Pattern

Need help?

Do you have a question about the Swiffer Continuos Clean SYFM12 and is the answer not in the manual?

Swiffer Continuos Clean SYFM12 Specifications

General

Brand	Swiffer
Model	Continuos Clean SYFM12
Category	Air Cleaner
Language	English

Summary

Filter Life Indicator Pattern

Filter Replacement Alert

Explains the visual indicator pattern on the filter that signals when it needs replacement due to captured particles.

Customer Service and Support

Contact and Website Information

Provides customer service phone number (800-221-6895) and website for inquiries and assistance.

Filter Removal and Replacement

Device Preparation and Cover Removal

Steps to unplug the device, twist counter-clockwise to remove the top cover.

Old Filter Disposal and Inlet Cleaning

Instructions to remove and discard the old filter and clean the air inlet.

New Filter Installation and Chip Insertion

Guide to sliding the new filter onto the fan base and inserting the Filter Identity Chip.

Power Connection and Initial Operation

Details on plugging the power cord into the unit and outlet, noting initial high-speed operation.

Securing the New Filter and Cover

Process for placing and locking the cover over the inflated filter.