any adjustments, changing accessories, or before
storing the power tool. Such preventive safety measure
reduces the risk of starting the power tool accidentally.
4. Store idle power tools out of reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate it. Power tools are
dangerous in the hands of untrained users.
5. Maintain the power tools. Check for misalignment
or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery Tool Use And Care
1. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
2. Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
3. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or fire.
4. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If you accidentally contact the
battery liquid, flush it with water. If the battery liquid contacts
the eyes, seek medical help as soon as possible. Liquid
ejected from the battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair
professional using only the identical replacement
parts. This will ensure that the safety of the power tool is
maintained.
PRODUCT SPECIFICATIONS
To Next Page
Loading...
Need help?
General
