To Next PageTo Next Page
Need help?Do you have a question about the Swim'n Play DELUXE 8000 and is the answer not in the manual?
General| Brand | Swim'n Play |
|---|---|
| Model | DELUXE 8000 |
| Category | Swimming Pool |
| Language | English |
Provides installation videos for reference.
Lists all necessary tools and materials for pool setup.
Outlines essential safety rules for pool use and setup.
Guides on selecting the optimal flat and safe location for the pool.
Instructions for checking package contents and parts.
Details on preparing a solid, level surface for pool installation.
Steps to ensure the ground is perfectly level using a level and shovel.
Instructions for unpacking and assembling the pool's side support structures.
Guides on digging trenches for reinforcement supports according to pool size.
Steps for assembling T-plates and vertical plates for the pool structure.
Instructions for assembling the end support posts for the pool frame.
Guides on inserting and securing center support posts into the pool frame.
Ensures assembled supports are level with each other using a beam and level.
Instructions for filling trenches with screened damp earth or sand.
Steps to pre-assemble bottom straps to hold down plates and secure them.
Guides on correctly laying out the bottom rails and strap assemblies.
Instructions for inserting the pool wall into the bottom rails.
Details on securing the pool wall by using all provided screws and nuts.
How to protect the PVC liner from sharp edges using adhesive tape.
Verifying measurements, straightness of side walls, and buttress spacing.
Instructions for removing protection plates for skimmer/backflow openings.
Guides on building a 20cm high embankment inside the pool wall.
Steps to clear the area, unfold, and place the liner into the pool.
Instructions for installing vertical posts over support posts and securing them.
Guides on inserting nuts into metal top plates for securing covers.
Steps for fitting top rails into plates and securing them around the pool perimeter.
Instructions for placing and securing top ledges onto metal top plates.
Guides for assembling and attaching top covers to the pool structure.
Initial steps for pool service, including pH, chlorine, and stabilizer adjustment.
Routine weekly checks and adjustments for pH, chlorine, and filter.
Methods for preventing and treating algae growth in the pool water.
Using flocculants to improve filter efficiency and remove suspended particles.
Procedures for preparing the pool for winter storage.
