Need help?Do you have a question about the Swimline HYDROTOOLS 71225 and is the answer not in the manual?
Lists essential tools for assembly, including screwdrivers and O-ring lubricant.
Initial steps for setup, including removing the valve and standpipe from the tank.
Detailed guide for correctly attaching the drain assembly to the bottom of the filter tank.
Instructions for securely mounting the pump to the filter base using the provided hardware.
Procedure for adding the specified amount of filter-grade sand into the tank.
Steps for lubricating and properly seating the O-ring and valve onto the filter tank.
Continues valve installation, focusing on positioning and securing the clamp for a proper seal.
Guide for connecting the system hoses to the skimmer, pump, and return fittings.
Procedures for priming, starting, backwashing, rinsing, and operating the filter system safely.
Identifies causes and solutions for reduced water flow, such as debris or air leaks.
Addresses issues causing short filter cycles, like algae or improper sand conditions.
Steps to resolve cloudy water by checking chemical levels and filter operation.
Essential steps to prepare the filter system for winter to prevent damage and maintain warranty.
General| Brand | Swimline |
|---|---|
| Model Number | 71225 |
| Filter Type | Sand |
| Filter Media | Sand |
| Type | Above Ground |
| Voltage | 110-120V |
To Next Page