Swing Caddie SC4 - Basic Operation; Club Selection; Mode Selection; Set Target Distance

07
Basic Operation
Club Selection
Mode Selection
Set Target Distance
Reset Shot Data
Button Press
(2 seconds)
Press
(6 seconds)
One Click
Settings / - Reset Shot Data
Club Selection -> Mode Selection ->
Set Target Distance
Power(On/Off)
Power / +
Increase
Volume
Decrease
Volume
-
SC4 Unit : Press [Settings] button for 2 seconds to select club > current club
is flashing > toggle with [+/-] buttons
[ ↔
W1(DRIVER)
↔
W3
↔
W4
↔
W5
↔
W6
↔
W7
↔
U3
↔
U4
↔
U5
↔
U6
↔
U7
↔
I3
↔
I4
↔
I5
↔
I6
↔
I7
↔
I8
↔
I9
↔
PW
↔
GW
↔
SW
↔
LW
↔ ]
-
Remote Control : Select desired club
(press button repeatedly until reaching desired club)
-
SC4 Unit : Press [Settings] button twice for 2 seconds to select mode >
current mode is flashing > toggle with [+/-] buttons
[
Practice
↔
Target]
-
Remote Control : Press [Mode] button to select
-
SC4 Unit : In target mode, press [Settings] button 3 times for 2 seconds to set target
distance > current target distance flashing > toggle with [+/-] buttons
[Target Distance Range : 15~195 yard]
-
Remote Control : Press [+/-] of [Target] button
- Press [Settings] button for 6 seconds > [DEL] will appear on the screen >
press [Power] button > reset complete
*
Once the reset completes, entire shot data will be deleted, and cannot be undone.
(App data need to be deleted separately)