To Next PageTo Next Page
Need help?Do you have a question about the Swisher RC11544CL and is the answer not in the manual?
Details warranty coverage for engines, placing responsibility with the engine manufacturer for service difficulties.
States the product is not intended for commercial use and carries no commercial warranty.
Specifies warranty applies only to products properly assembled, adjusted, and operated per manual instructions.
Excludes normal wear, adjustments, and maintenance from warranty coverage.
Describes the 44" Trail Cutter's purpose: clearing dense grass and saplings, not finish mowing.
Provides instructions for connecting the cutter to a tow vehicle, including hitch pin use and leveling.
Outlines steps for safe transport, including stopping the cutter and securing the spark plug wire.
Details the procedure for safely shutting down the engine, including disengaging blades and cooling.
Explains how to engage and disengage the cutter blades using the T-handle lever.
Describes the initial break-in procedure for the cutter's belt and engine.
Guides on checking fluids, connections, and the process to start the engine.
Explains how to adjust the hitch to ensure the cutter deck is parallel to the ground.
Details how to adjust the cutting deck height using the crank handle.
Recommends offsetting the hitch for proper towing and overlap, keeping the tow vehicle higher.
Steps to prepare for cutting, including adjusting height, checking attachment, and engaging blades.
Instructions for safely ending a mowing session, including stopping the vehicle and turning off the key.
Offers advice on optimal cutting performance, handling wet grass, and cutting dense areas.
Emphasizes operator responsibility for maintenance to ensure warranty value and unit performance.
Lists seasonal maintenance tasks: replacing spark plug, cleaning air filter, checking blades and belts.
Details pre-operation checks: engine oil, air filter, blade operation, fasteners, and lubrication.
Focuses on daily checks: ensuring nuts/bolts are tight, cotter pins secure, and blades are sharp.
Provides guidance on sharpening blades, replacing damaged ones, and checking hardware tightness.
General| Model | RC11544CL |
|---|---|
| Category | Cutter |
| Engine | Briggs & Stratton |
| Engine Size | 11.5 HP |
| Engine Type | 4-Cycle |
| Cutting Width | 44 inches |
| Drive Type | Self-Propelled |
| Start Type | Recoil |
