Swisher WRC10224HC - User Manual

OWNER’S MANUAL
SWISHER ACQUISITION INC.
1602 CORPORATE DRIVE, WARRENSBURG MISSOURI 64093
PHONE (660) 747-8183 FAX (660) 747-8650
Operation
Service and Adjustment
Repair Parts
FOR MODELS – WRC10224HC, WRC10224H, WRC11524BSC, WRC11524BS
swisherinc.com
21919 REV 18-335
STARTING SERIAL #:
L118-335001
24” WALK BEHIND
Rough Cut Trail Cutter
RECOIL AND ELECTRIC START MODELS
ade I The
USA
of US and Global Parts
PREDATOR TALON
COMMERCIAL PRO
WRC10224HC
PREDATOR
COMMERCIAL PRO
WRC10224H
PREDATOR TALON
WRC11524BSC
PREDATOR
WRC11524BS
WRC11524CL
Read and follow all Safety Precautions and Instructions before
operating this equipment.
IMPORTANT

Summary

Safety Precautions for Operation

General Safety Guidelines

Provides essential safety instructions for operating the walk behind mower.

Pre-Operating Procedures

Pre-Operation Checks and Setup

Steps to ensure the mower is properly assembled and ready for operation.

Electric Starter Battery Connections

Battery Connection Steps

Step-by-step guide for correctly connecting the 12-volt starter battery.

Battery Safety Warning

Critical safety information regarding battery handling and potential explosion risk.

Operating Your Walk Behind Mower

Intended Use and Capabilities

Defines the purpose and cutting capabilities of the mower.

Engaging the Cutting Blade

Details the procedure for activating the mower's blade.

Engine Starting, Stopping, and Operation

Starting the Engine

Procedures for starting Honda and Briggs & Stratton engines.

Stopping the Mower Safely

Steps to safely bring the walk behind mower to a complete stop.

Procedure for Beginning Cutting

Final checks and steps before commencing cutting operations.

Handling and Maintenance Guidelines

Seasonal and Pre-Use Maintenance

Checks and maintenance required before the season and before each use.

Daily Maintenance and Blade Care

Engine and Pulley Assembly (Honda Models)

Honda Engine and Pulley Components

Engine and Pulley Assembly (Briggs & Stratton Models)

Briggs & Stratton Engine and Pulley Components

Blade Driver Assembly Components

Blade Driver System Parts

Wiring Configurations

Honda Engine Wiring Harness

Briggs Engine Wiring Harness

Belt Routing and Model Specifications

Belt Routing Diagram

Illustrates the correct routing path for the blade and transaxle belts.

Swisher WRC10224HC Specifications

General

Number of Blades	1
Deck Material	Steel
Drive System	Hydrostatic
Start Type	Recoil
Cutting Height	1.5 - 4 inches