2. Connect Pipes
Screw plumbing pipes into basin.
NOTE: Plumbing not included.
3. Connecting Plumbing
Align pipes in basin to plumbing in wall.
Tighten into place, with clockwise motion.
At this stage we recommend installing the faucet of
your choice. (Faucet not included)
4. Seal Sink- 2 People Required
Person 1- Slightly tilts sink back, so basin just barely lifts o ground.
Person 2- Apply construction adhesive underneath the sink.
Caulk the sink to the oor with silicone or sealant of your choice.
Gently lower basin back to standing position.
— 6 —
DO NOT USE SINK UNTIL 24 HOURS AFTER INSTALLING
To Next Page
Loading...
