Swiss Pro+ SP-PC.5LE - Troubleshooting Common Issues

9
Troubleshooting
No.
Problem
Possible Cause
Solution
1
Difficult to
cover.
The sealing ring is not correctly
positioned.
Place the sealing ring in a correct position.
Floating valve stuck to the bar.
Push the bar lightly.
2
Difficult to
uncover.
The floating valve is not in place.
Press the valve lightly with wooden sticks.
3
Steam leaking
Sealing ring is not in place.
Put in the sealing ring.
Dirt in the sealing ring.
Clean the sealing ring.
Damaged sealing ring.
Replace the sealing ring.
The lid is not secured properly.
Attach the lid in line with the standard
position.
4
Floating valve
leaking
Dirt in the sealing ring or floating
valve.
Cleaning the seal ring of the float valve.
Damage to the sealing ring.
Replace the sealing ring.
5
The floating
valve cannot be
raised
Insufficient food in the pressure
cooker.
Add food and water according to the
correct directions.
Leakage in the lid or pressure
displaying.
Send it back to the seller.