To avoid deformation or electronic malfunction
of the control panel, do not place any heavy or
Please ensure that the electricity wall socket is installed according to the National
standards for your country.
hot objects on top of the dryer.
It is very important to position the unit upright(both front and sides) to avoid
any fault or unnecessary vibration.
If the dryer is not placed on a level floor the dryer can develop operating and/or
electronic problems.
plumb-line or spirit-level
Clothes with the following markings must not be dried in this dryer.
Do not install the dryer outside or in a place where it can be damaged by rain or moisture.
Do not place the back of the dryer up against curtains or any other flammable material or fabric.
To Next Page
Loading...