Swisscom Internet-Box light User Manual

HD-Phone
* Insert the DSL
cable in this
port!
KKD+JM (B2C-TSP-UID) 10233696 07/2020 EN
Setting up
your
Internet-Box
and phones
Internet-Box light
Installation overview
The package includes:
Internet-Box light
Power adapter
Telephone socket
adapter (white)
Telephone adapter
(black)
DSL cable
Your IP phone is ready for use.
If your subscription includes
Internet access, please refer to
the information on the reverse.
Analogue telephone
If you have a Swisscom
HD-Phone, you can connect
it over DECT.
HD-Phone
Select the connection mode in the settings of your
HD-Phone and press the
button on your Internet-Box.
The two devices connect automatically.
Connect the Internet-Box to
the power and switch it on.
* Once this phone socket (digital socket) has been installed, you can use all the phone sockets in your homes to plug in your
phones. If you don’t have such a digital socket, you have to plug your phones directly into the Internet-Box. Alternatively,
you can have your home installation adjusted by a specialised technician.
Connect the Internet-Box using the DSL cable supplied and plug it
into a phone socket (4 versions illustrated).
Now connect your analogue phone only to the «phone»
port on the back of your Internet-Box – and not to the wall
phone socket. Use the black phone adapter if necessary.
Connect your phone.
Wait 5 - 10 minutes until the
LED lights up white.
You are now connected to the Swisscom network.
Swisscom (Switzerland) Ltd.
Postfach
3050 Bern
www.swisscom.ch/internetbox-help
0800 800 800
5
1
2
3
4
Start
6

Swisscom Internet-Box light Specifications

General

Brand	Swisscom
Model	Internet-Box light
Category	Telephone
Language	English