swissflex uni 20_95RF

Questions and Answers

R
Robert CarrAug 4, 2025
What to do if my swissflex Indoor Furnishing uni 20_95RF | uni 21_95RF does not work?
- J
  Joseph JacobsAug 4, 2025
  If your swissflex Indoor Furnishing (uni 20_95RF | uni 21_95RF) is not working, first, disconnect the mains supply unit from the mains outlet, wait a minute, and then reconnect it. Check that mains voltage (230V) is present, if necessary, connect a bedside lamp to check. If there is no current, check the fuse. You can also press the «all motors combined» button «down» to reset all adjustments.
T
Tina WarnerAug 9, 2025
Why is my swissflex uni 20_95RF Indoor Furnishing radio remote control not working?
- V
  Victoria HartmanAug 9, 2025
  If the radio remote control for your swissflex Indoor Furnishing isn't working (and the background light is off), try inserting new batteries. Also, make sure there are no obstacles between the remote and the motor control.
J
John HardinAug 13, 2025
What to do with swissflex uni 20_95RF Indoor Furnishing after a power failure?
- A
  Alexis JohnsonAug 13, 2025
  Following a power failure with your swissflex Indoor Furnishing (uni 20_95RF | uni 21_95RF), press and hold the «all motors combined» «down» button until all comfort areas have reached the horizontal position and the motors have stopped moving before resuming use.
L
Luis FlemingAug 18, 2025
How to move swissflex uni 20_95RF Indoor Furnishing in the sitting position when there is a power loss?
- H
  Heather PerezAug 18, 2025
  If you experience a loss of power in the sitting position with your swissflex Indoor Furnishing, use the emergency lowering key (23) to move the bed to the horizontal position.
C
Cassandra BoyerAug 23, 2025
How to activate emergency lowering on swissflex Indoor Furnishing?
- S
  Stephen SpencerAug 25, 2025
  To activate the emergency lowering function on your swissflex Indoor Furnishing, press the emergency lowering button (23) on the controller to reach the horizontal (basic) position.
J
Johnathan ClarkAug 28, 2025
What to do if repeated use of emergency lowering drains swissflex Indoor Furnishing batteries?
- H
  Heather LesterAug 28, 2025
  Repeatedly using the emergency lowering function on your swissflex Indoor Furnishing strains the batteries. In this case, the batteries must be replaced.