Swisslog corob D200 - D200 error codes

group
Member of
D200
error codes
CODE MEANING CIRCUIT
INDICATION
NOTES
0x7B00 Error in carriage position
(optic switch not detected
during the reset)
from 0x7B01 to
0x7BFF
0x7C00 Motor jammed
(optic switch always darkened)
from 0x7C01 to
0x7CFF
0x7D00 Wrong stroke
(optic switch obscured too
early, during the suction stage)
from 0x7D01 to
0x7DFF
0x7007 line RS485 jammed ONLY FOR
SIMULTANEOUS
MACHINE
0x7E00 Command timeout error
(the module is not answering)
from 0x7E01 to
0x7EFF
ONLY FOR
SIMULTANEOUS
MACHINE
0x7F00 Module status error from 0X7F01 to
0x7FFF
ONLY FOR
SIMULTANEOUS
MACHINE