Stack Font Sizes menu
1. Font Size Offset Reg X: 0
2. Font Size Offset Reg Y: 0
3. Font Size Offset Reg Z: 0
4. Font Size Offset Reg T: 0
5. Font Size Offset Reg L: 0
6. Font Size Offset Reg A: 0
For each register a font offset in range -5 .. 5 could be specified. Each font offset is relative to
current font size set by [ F6 ] / [ SHIFT ]+[ F6 ] keys.
Example:
Lets expect there are five font sizes 1 to 5 and third font size is selected. If the "Font Size Offset Reg
X" is set to 1 and other offsets remain zeroed, then the X register will be displayed in one step larger
font then others.
Note that the if the maximal font size is reached the font remains at maximal size. So, setting all
font offsets to 5 actually disables any effect of [ F6 ] / [ SHIFT ]+[ F6 ] keys.
5. Beep Mute
Selecting this menu item toggles the 'Beep Mute' flag.
When the 'Beep Mute' flag is active, no sounds are produced by the calculator.
Note that this value is stored in the calculator state file.
6. Slow Auto-repeat
Selecting this menu item toggles the 'Slow Auto-repeat' flag.
When the 'Slow Auto-repeat' flag is active auto-repeat delays are prolonged.
Note that this value is stored in the calculator state file.
7. Stack Layout
Enters stack layout selector where one of following layouts could be selected
Stack Layout menu
1. XYZTL
2. XYZTA
3. XYZT
4. XYL
5. XYA
6. XY
13
To Next Page
Loading...
