EasyManua.ls Logo

swissonic USB Studio D - Page 18

swissonic USB Studio D
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Swissonic AG warrant this equipment against defects
in materials and workmanship for a period of twelve
months from the date of original retail purchase. If you
discover a defect, first write or call Swissonic AG at
(0041) 55 285 86 10 to obtain a Return Merchandise
Authorization Number. No service will be performed
on any product returned without prior authorization.
Swissonic AG will, at its option, repair or replace the
product at no charge to you, provided you return it
during the warranty period, with transportation
charges prepaid, to Swissonic AG, P.O. Box 304,
CH-8730 Uznach, Switzerland. You must use the
product’s original packing material for in shipment, and
insure the shipment for the value of the product.
Please include your name, address, telephone
number, a description of the problem, and the original,
dated bill of sale with the returned unit and print
the Return Merchandise Authorization Number on
the outside of the below the shipping address. This
warranty does not apply if the equipment has been
damaged by accident, abuse, misuse, or misapplication;
has been modified without the written permission of
Swissonic AG, or if the product serial number has
been removed or defaced. All implied warranties,
including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration
to one year from the date of the original retail
purchase of this product. The warranty and remedies
set forth above are exclusive and in lieu of all others,
oral or written, express or implied. No Swissonic
distributor, dealer, agent, or employee is authorized
to make any modification, extension, or addition
to this warranty. Swissonic AG is not responsible for
special, incidental, or consequential damages resulting
from any breach of warranty, or under any legal theory,
including lost profits, downtime, goodwill, damage
or replacement of equipment and property and
cost of recovering reprogramming, or reproducing any
program or data stored in or used with Swissonic
products. Some states do not allow the exclusion or
limitation of implied warranties or liability for
incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This
warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
Uznach, Switzerland, December 1, 1999
This equipment has been
tested and found to
comply with the limits for
a class B digital device,
pursuant to part 15 of the
FCC rules. These limits
are designed to provide
reasonable protection
against harmful interfer-
ence in a residental in-
stallation. This equipment
generates, ises, and can
radiate radio frequency
emergency and, if not in-
stalled and used in accor-
dance with the instruc-
tion manual, may cause
harmful interference to
radio communications.
However, there is no
guarantee that inter-
ference will not occur
in a particular installation.
If this equipment does
cause interference to
radio or television equip-
ment reception, which
can be turning the equip-
ment off and on, the user
is encouraged to correct
the interference by any
combination of the fol-
lowing measures:
n
Relocate or reorient
the receiving antenna
n
Increase the separation
between the equipment
and the receiver
n
Plug the equipment into
an outlet on a circuit
different from that to
which the receiver is
connected
If necessary, you can
consult a dealer or expe-
rienced radio/television
technician for additional
assistance.
PLEASE NOTE: only
equipment certified to
comply with Class B
(computer input/output
devices, terminals, print-
ers etc) should be
attached to this equip-
ment, and it must have
sheilded interface cables
in order to comply with
the Class B FCC limits
on RF emissions.
WARNING: changes or
modifications to this unit
not expressly approved
by the party responsible
for compliance could
voide the user’s authority
to operate the equipment.
19
Limited Warranty on Hardware

Related product manuals