Need help?Do you have a question about the swissonic USB Studio D and is the answer not in the manual?
General| Brand | swissonic |
|---|---|
| Model | USB Studio D |
| Category | Recording Equipment |
| Language | English |
Controls the input level for microphone channels 1 and 2.
Indicates when 48V phantom power is active for mic inputs.
Switches mic inputs between monitor and record buses.
Controls the input level for instrument channels 1 and 2.
Switches instrument inputs between monitor and record buses.
Adjusts the input levels for line, phono, and digital sources.
Assigns line, phono, and digital inputs to monitor or record buses.
Shows when a valid digital source is connected and locked.
Controls the playback signal level from the computer.
Adjusts the signal level sent to the computer via USB.
Peak level meter for the recorded USB signal.
Controls the signal level for the digital output.
Indicates if the digital output signal is close to clipping.
Selects the digital output source from record or monitor bus.
Adjusts the level of the monitor output signal.
Mutes the monitor output signal.
Switch to select the correct input voltage.
Specs for input voltage, power consumption, and fuse ratings.
To Next Page
