What to do if swissonic V5 Speakers have no sound?
If your swissonic Speakers aren't producing sound, there are several things to check: * First, verify the volume control is properly adjusted. * Second, ensure the signal cables are correctly connected. * Third, inspect the signal cables and the signal source for any issues. * Finally, try using an alternative signal cable to rule out a faulty cable.
Why is there audible distortion from my swissonic Speakers?
Audible distortion from your swissonic Speakers is often due to an excessive input signal. Try reducing the signal level to resolve this issue.
How to stop noise and hum from swissonic V5?
To eliminate noise and hum from your swissonic Speakers: * Ensure that you are using only balanced cables. * Verify that all your audio devices are connected to the same power circuit, so they share the same ground reference.
What to do if high frequencies slump when music gets loud on swissonic V5?
If the high frequencies slump when the music gets loud on your swissonic Speakers, it might be due to imminent overheating. Try to provide better ventilation or reduce the volume.
Defines the device's intended use and provides guidance on manual usage, safety notes, and future reference.
Details accessing additional information, downloading the manual, keyword search, online guides, and customer support.
Explains the use of square brackets and italics for controls and connectors in the manual.
Introduces the section explaining the meaning of symbols and signal words used throughout the manual.
Specifies the device's intended use and user qualifications, emphasizing safe operation by knowledgeable individuals.
Warns about choking hazards from packaging and small parts, stressing supervision of children with electrical devices.
Covers risks of electric shock from high voltages and short-circuits, advising on proper wiring and avoiding unauthorized access.
Instructs on secure installation with secondary attachments to prevent injury from falling devices.
Alerts to potential hearing impairment from prolonged exposure to high volume levels and suggests precautions.
Advises on fire prevention by ensuring ventilation and avoiding heat sources, and specifies operating conditions to prevent damage.
Ensures correct voltage, RCD protection, unplugging during storms, and using only correct fuse types to prevent damage or fire.
Warns about plasticisers in rubber feet potentially staining surfaces and recommends using underlays.
Details key features for V5, V7, and V8 models, including speaker size, amplifiers, and frequency ranges.
Highlights features for adapting sound to room acoustics and lists available input connection types (XLR, 1/4", RCA).
Mentions adjustable input sensitivity and the device's standby function for power saving.
Provides instructions for unpacking, checking for damage, keeping packaging, and safely routing cables during installation.
Warns about loudspeakers producing magnetic fields and advises maintaining a safe distance from sensitive electronic devices.
Ensures safe installation on stands by checking stability and not exceeding the stand's load capacity.
Explains the color changes of the front panel LED (red for standby, blue for active) indicating device status.
Presents a labeled diagram of the rear panel, identifying all connections, controls, and ports.
Details each numbered control and connection on the rear panel, including volume, DIP switches, and various input/output ports.
Lists detailed technical data for the V5 model, covering speaker, inputs, impedance, sensitivity, output power, and amp class.
Provides V5 specifications for SPL, frequency range, power consumption, dimensions, weight, and ambient operating conditions.
Lists detailed technical data for the V7 model, covering speaker, inputs, impedance, sensitivity, output power, amp class, and SPL.
Provides V7 specifications for frequency range, power consumption, dimensions, weight, and ambient operating conditions.
Lists detailed technical data for the V8 model, covering speaker, inputs, impedance, sensitivity, output power, amp class, and SPL.
Provides V8 specifications for frequency range, power consumption, dimensions, weight, and ambient operating conditions.
Guides users on selecting appropriate cables and plugs for optimal sound quality and warns against incorrect connections.
Explains the principles and advantages of balanced audio transmission over unbalanced for professional use.
Details the pin configuration for a 1/4" TRS phone plug, specifying signal and ground connections for balanced mono.
Illustrates and describes the pin assignments for XLR (balanced) and RCA (unbalanced) connectors used for audio signals.
Provides solutions for a non-functional unit, checking power supply terminal and switch position.
Offers steps to resolve no sound issues, including checking volume, cables, signal source, and using alternative cables.
Addresses high-frequency drop at loud volumes by suggesting better ventilation or volume reduction due to potential overheating.
Recommends reducing input signal level to fix distortion, indicating an excessive input signal.
Suggests using balanced cables and ensuring shared ground reference for all audio devices to eliminate noise and hum.
Instructs on proper recycling and disposal of environmentally friendly packaging, avoiding household waste.
Explains WEEE directive for electronic waste, recommending disposal via approved firms or local facilities.
Defines the device's intended use and provides guidance on manual usage, safety notes, and future reference.
Details accessing additional information, downloading the manual, keyword search, online guides, and customer support.
Explains the use of square brackets and italics for controls and connectors in the manual.
Introduces the section explaining the meaning of symbols and signal words used throughout the manual.
Specifies the device's intended use and user qualifications, emphasizing safe operation by knowledgeable individuals.
Warns about choking hazards from packaging and small parts, stressing supervision of children with electrical devices.
Covers risks of electric shock from high voltages and short-circuits, advising on proper wiring and avoiding unauthorized access.
Instructs on secure installation with secondary attachments to prevent injury from falling devices.
Alerts to potential hearing impairment from prolonged exposure to high volume levels and suggests precautions.
Advises on fire prevention by ensuring ventilation and avoiding heat sources, and specifies operating conditions to prevent damage.
Ensures correct voltage, RCD protection, unplugging during storms, and using only correct fuse types to prevent damage or fire.
Warns about plasticisers in rubber feet potentially staining surfaces and recommends using underlays.
Details key features for V5, V7, and V8 models, including speaker size, amplifiers, and frequency ranges.
Highlights features for adapting sound to room acoustics and lists available input connection types (XLR, 1/4", RCA).
Mentions adjustable input sensitivity and the device's standby function for power saving.
Provides instructions for unpacking, checking for damage, keeping packaging, and safely routing cables during installation.
Warns about loudspeakers producing magnetic fields and advises maintaining a safe distance from sensitive electronic devices.
Ensures safe installation on stands by checking stability and not exceeding the stand's load capacity.
Explains the color changes of the front panel LED (red for standby, blue for active) indicating device status.
Presents a labeled diagram of the rear panel, identifying all connections, controls, and ports.
Details each numbered control and connection on the rear panel, including volume, DIP switches, and various input/output ports.
Lists detailed technical data for the V5 model, covering speaker, inputs, impedance, sensitivity, output power, and amp class.
Provides V5 specifications for SPL, frequency range, power consumption, dimensions, weight, and ambient operating conditions.
Lists detailed technical data for the V7 model, covering speaker, inputs, impedance, sensitivity, output power, amp class, and SPL.
Provides V7 specifications for frequency range, power consumption, dimensions, weight, and ambient operating conditions.
Lists detailed technical data for the V8 model, covering speaker, inputs, impedance, sensitivity, output power, amp class, and SPL.
Provides V8 specifications for frequency range, power consumption, dimensions, weight, and ambient operating conditions.
Guides users on selecting appropriate cables and plugs for optimal sound quality and warns against incorrect connections.
Explains the principles and advantages of balanced audio transmission over unbalanced for professional use.
Details the pin configuration for a 1/4" TRS phone plug, specifying signal and ground connections for balanced mono.
Illustrates and describes the pin assignments for XLR (balanced) and RCA (unbalanced) connectors used for audio signals.
Provides solutions for a non-functional unit, checking power supply terminal and switch position.
Offers steps to resolve no sound issues, including checking volume, cables, signal source, and using alternative cables.
Addresses high-frequency drop at loud volumes by suggesting better ventilation or volume reduction due to potential overheating.
Recommends reducing input signal level to fix distortion, indicating an excessive input signal.
Suggests using balanced cables and ensuring shared ground reference for all audio devices to eliminate noise and hum.
Instructs on proper recycling and disposal of environmentally friendly packaging, avoiding household waste.
Explains WEEE directive for electronic waste, recommending disposal via approved firms or local facilities.
To Next Page
General
