1 [Volume]
Rotary control to adjust the overall volume
2 [HF]
DIP switch to adapt the treble to the room acoustics (–2 dB, 0 dB, +2 dB)
3 [LF]
DIP switch to adapt the bass to the room acoustics (–2 dB, 0 dB, +2 dB)
4 [Switch]
DIP switch for adjusting the input sensitivity (+4 dBu, –10 dBV)
5 Connection for playback devices with line level (unbalanced), designed as a RCA socket
6 [Power]
Mains switch. Turns the device on and o.
7 IEC chassis plug with fuse holder for the power supply
8 Connection for a balanced input signal, designed as a XLR panel socket, 3-pin
9 Connection for a balanced input signal, designed as a ¼" jack socket
Connections and operating elements
V5, V7, V8
19
Active Studio Monitor
To Next Page
