Need help?Do you have a question about the SwissPhone RE729 and is the answer not in the manual?
General| Vibration Alert | Yes |
|---|---|
| LED Indicator | Yes |
| IP Rating | IP54 |
| Programming Interface | USB |
| Frequency Band | VHF, UHF |
| Frequency Range | 138-174 MHz, 400-470 MHz |
| Display | LCD |
| Alert Types | Vibration |
| Battery Type | AA |
| Type | Pager |
Basic setup steps for immediate use of the pager programming kit.
Setting the operating frequency for the pager.
Defining call addresses and associated alert tones for the pager.
Configuring the pager's menu options through the programming software.
Final configuration of various pager settings.
Confirming and programming the selected settings onto the pager.
Setting multiple operating frequencies for multi-channel pagers.
Defining alert addresses and tones for multi-channel pagers.
Configuring menu options for multi-channel pagers.
Configuring general settings for multi-channel pagers.
Programming the final settings onto the multi-channel pager.
Reading the current configuration from the pager.
Defining receiving frequencies and profiles for the pager.
Specifying alert addresses, tones, and patterns.
Configuring various operational options for the pager.
Activating and arranging pager menu functions.
Setting tone frequencies and composing beeper/LED alert patterns.
To Next Page
