@ Insert the Hook with the Main Unit onto your curtain track. Pull
down both Hooks, align the snaps to attach the detachable Hook
back to the Main Unit. You will hear a clicking sound once firmly
attached. The SwitchBot logo should be facing inwards.
SwitchBot
Installation for Special Models
If SwitchBot Curtain U Rail 3 does not fit smoothly on your curtain
track, your curtain track type may be the issue. Below are two
examples of non-standard curtain tracks. Please scan the QR code
below or visit the following website for more information.
https://support.switch-bot.com/hc/en-us/a rticles/1 500012094841
To Next Page
Loading...
