SwitchBot Curtain U Rail 3 - Page 6

@ Select one set of appropriately sized Hook Wheels. Flickthe two
plastic wheels to both sides to expose the metal bar in the middle.
Attach a set of Hook Wheels to the Hook as shown in the picture.
You should hear a clicking sound once it is firmly attached.
@ Repeatthe same steps to replace the Hook Wheels on the other
Hook with the Main Unit.
Installing SwitchBot Curtain U Rail 3 onto your
curtain track
@ Fully close your curtain, then remove the first curtain hook from
the track.
O
@ Insert the detachable Hook from the bottom gap of your curtain
track and rotate it by 900to fit the Hook Wheels on your track.