SwitchBot Curtain U Rail 3 - Page 9

Installing on Regular U Rail Models
@ Push your SwitchBot Curtain U Rail 3 to the fully closed position.
@ Peel off the tape liner on the back of your magnet. Point the
arrow to your curtains' closing direction, and stick it to your curtain
track surface as shown in the picture below.
Please note: stick your magnet on the front of your curtain track, the same side
of the SwitchBot logo on your device.
1
1
1
1
1
1
1
1
Closing towards right
Closing towards left
@ Hang your curtain back in place and hide SwitchBot U Rail 3
behind your curtain fabric.
1
Swi SwitchBot
Closing towards right
Double-sided curtains