SwitchBot Curtain U Rail 3 - Page 10

Installing on Special U Rail Models
U rail track that is embedded in the ceiling:
@ Push your SwitchBot Curtain to the fully closed position.
@ Point the arrow to your curtains' closing direction, and stick it
to your curtain track as shown in the picture below.
Please note: Stick your magnet to the ceiling on the same side of the SwitchBot
logo on your device. Make sure the magnet is as close as possible to your
SwitchBot Curtain's Main Unit.
1
1
1
SwitchBot
U rail track that looks like rod in shape:
O Push your SwitchBot Curtain to the fully closed position.
@ Point the arrow to your curtains' closing direction, and stick it
to your curtain track as shown in the picture below.
Please note: Stick your magnet on the front of your curtain track, the same
side of the SwitchBot logo on your device. Make sure the magnet is as close
as possible to your SwitchBot Curtain's Main Unit.
1