Open the doors of the rooms to be cleaned, arrange the furniture
neatly, and try to clear a largest cleaning space.
Please avoid standing in front of your robot, doorways, or narrow
passages in case your robot cannot detect the area to be cleaned.
Note
1. When using the robot for the first time, follow it throughout its whole
cleaning route and watch for potential problems. This will help you
identify and resolve minor issues, ensuring a more efficient cleaning
process in the future.
2. If the robot gets stuck under low furniture, you can try the following
solutions:
(j) Block the bottom of the furniture;
@ Set a virtual wall in the app to prevent the robot from entering;
@ If possible, raise the furniture slightly.
Placing the Dual Empty Station
1. Place the Dual Empty Station on a hard, level surface (such as
a floor or ceramic tile) against a wall, ensuring there is at least
1 m (3.3 ft.) of space in front and above, and 0.5 m (1.6 ft.) on
both sides. Make sure the location has a good Wi-Fi signal to
provide a better network connection and app user experience.
2. Plug the Dual Empty Station into an outlet, ensure the indicator
light turns on.
0.5 m (1.6 ft.)
1 m (3.3 ft.)
0.5 m (1.6 ft.)
06
To Next Page
Loading...