Step 1: Confirm Installation Position
Tips: To avoid repeatedly changing positions after
installation and causing damage to your wall, we
suggest that you add Keypad Touch on our app first
to see whether you can control the Lock via Keypad
Touch at the chosen position. Make sure your Keypad
Touch is installed within 5 meters (16.4 ft) from
your Lock.
Add Keypad Touch following the instructions
on the app. After adding successfully, find a
suitable position on the wall, attach SwitchBot
Keypad Touch to the chosen position with
your hands, then check if you can lock and
unlock SwitchBot Lock smoothly when using
Keypad Touch.
If everything works correctly, place the
alignment sticker to the position chosen and
mark holes for screws using a pencil.
08
To Next Page
Loading...
