Step 2: Determine Drill Bit Size and
Drill Holes
Tips: For outdoor usage, we recommend that
you install with screws to prevent SwitchBot Keypad
Touch being moved without your permission.
Concrete or other hard surfaces can be challenging
for drilling. If you are not experienced with drilling
into a particular type of wall, you may want to
consider consulting a professional.
Prepare a suitably sized electric drill bit
before drilling.
@When installing on more rugged surfaces
like concrete or brick:
Use an electric drill with the 6 mm (15/64")
sized drill bit to drill holes at the marked
positions, then use the rubber hammer to
hammer the expansion bolts into the wall.
09
To Next Page
Loading...
