Step 1: Confirm Installation Position
Tips: To avoid repeatedly changing positions after
installation and causing damage to your wall, we
suggest that you add Keypad on our app first to
see whether you can control the Lock via Keypad
at the chosen position. Make sure your Keypad is
installed within 5 meters (16.4 ft) from your Lock.
Add Keypad following the instructions on the
app. After adding successfully, find a suitable
position on the wall, attach SwitchBot Keypad
to the chosen position with your hands, then
check if you can lock and unlock SwitchBot
Lock smoothly when using Keypad.
If everything works correctly, place the
alignment sticker to the position chosen and
mark holes for screws using a pencil.
SwitchBot
08
To Next Page
Loading...