Step 2: Determine Drill Bit Size and
Drill Holes
Tips: For outdoor usage, we recommend that you
install with screws to prevent SwitchBot Keypad
being moved without your permission. Concrete or
other hard surfaces can be challenging for drilling.
If you are not experienced with drilling into a
particular type of wall, you may want to consider
consulting a professional.
Prepare a suitably sized electric drill bit
before drilling.
O When installing on more rugged
surfaces like concrete or brick:
Use an electric drill with the 6 mm (15/64")
sized drill bit to drill holes at the marked
positions, then use the rubber hammer to
hammer the expansion bolts into the wall.
09
To Next Page
Loading...
