Hibernation
f your robot is not operated for more than 10 minutes, it will
utomatically enter hibernation. Press any button to wake it up.
lease note: The robot will not enter hibernation while charging.
Do Not Disturb Mode
he default setting for this mode is from 22:00 to 08:00, and you
an modify or disable it via our app. During the Do Not Disturb
period, device button lights will stay off, and your robot will not
utomatically resume cleaning or play voice prompts.
hild Lock
ou can use the Child Lock function in our app to lock the robot
buttons. You can unlock it via our app.
Restoring to Factory Settings
Pressand hold the @)+@ +@ button simultaneouslyfor 6
econds to restore the robot to factory settings. The voice prompt
ill say, "Restoring to factory settings."
Care and Maintenance
To keep your robot running at peak performance, care and
maintain your robot regularly as shown in the sheet below.
Part
Omnidirectional Wheel
Dustbin
Anti-Tangle Rubber Brush
Waste Filter (Water Station)
Dustbin Filter
Side Brush
Roller Mop
Waste Water Box
Care Frequency
Clean as needed
Once every 2 weeks
Monthly
Replacement
Frequency
6 to 12 months
3 to 6 months
1 to 3 months
6 to 12 months
Waste Water Collection Gutter
LDS Laser Radar
Wall Follow Sensor
Front Docking Sensor
Back Docking Sensor
Infrared Obstacle
Avoidance Sensor
Monthly
Carpet Sensor
Cliff Sensor
Charging Contacts
Debris Evacuation Port
Water Inlet
Bottom Surface
12
To Next Page
Loading...