During the cleaning process, your robot will determine the
iming for exchanging water itself. It will automatically return to
he Water Station, drain the waste water and replenish clean
ater to ensure good cleaning performance.
ote:
To facilitate the normal water exchange of the robot, please do not move the Water
Station during the cleaning and mopping process. If there is a door hiding the Water
Station, please keep the door open.
If the battery is low, please charge it before starting the cleaning task.
If the battery is insufficient during the cleaning process, the robot will automatically
return to the Auto-empty Station for charging.
When the robot is set to clean carpets, it will automatically raise the Roller Mop when
detected. You can choose to bypass carpets in our app.
Before starting each mopping task, please make sure that the Roller Mop is correctly
installed.
witching Mode
ressthe@button onceto changethe cleaningmodeof your
obot. You will hear a sound and voice prompt when the mode
witches successfully. It will be set to Vacuum mode by default.
Note:
In Vacuum mode, the Roller
Mop will automatically raise
and stop rolling.
Pausing Your Robot
Press any button on your robot to stop it while working. When
paused,tap the (Q)button to resume the previouscleaning task,
apthe@ button to finish the task,and your robot will go to the
ater Station first to exchange water and then return to the
uto-empty Station to recharge.
Exchanging Water
While vacuuming or mopping, your robot will automatically go
o the Water Station to exchange water if needed, and then go
back to its previous position to resume cleaning.
After finishing a cleaning task, your robot will go to the Water
tation first, have a deep cleaning and replenish clean water, then
return to Auto-empty Station to recharge.
Recharging
fter finishing a cleaning task, your robot will automatically return
o Auto-empty Station to recharge. To manually send it back to
recharge, pressthe@ button on your robot. The indicator light
ill be breathing when charging.
Note:
f the robot does not find the Auto-empty Station, it will automatically return to the
tarting position. Please manually dock it to the Auto-empty Station for charging.
11
To Next Page
Loading...