313
314
Answering Machine
189
Remote access, key function assignment
The following table provides an overview of the functions available and the key to press to initiate
the respective function.
Key
If no messages are played If messages are played
Delete message
Play message again
Play message, resume playback Stop playback (Pause)
Play the next message
Switch the answering machine on/off
Record memo
1
Stop playback
Switching on the answering machine via remote access
Dial your phone number from an external telephone.
The telephone is switched on after the 10th ring and
a longer acoustic signal is issued.
Activate the remote access function.
A longer acoustic signal is then issued.
Enter the 4−digit PIN for remote access. A longer
acoustic signal is issued.
Activate the answering machine .
A longer acoustic signal is issued.
The outgoing message is played.
End the call
1
End recording a memo by ending remote access.
To Next Page
