Extending the Telephone System
190
8 Extending the Telephone System
The internationally approved GAP
1
regulates the compatibility of handsets and telephones (base
stations/units) from different manufacturers. As a result, it is possible to integrate SWITEL devices
and devices from other manufacturers together in one telephone system. It is possible, however,
that some functions are not available.
Multiple handsets
Up to 6 handsets can be registered on the base unit.
Registering handsets
Handsets are registered via the menu; Menu Structure, Pages 169 and 170.
On the base unit:
, / ,
Base setting
, Open the menu
/ ,
Register
, ,
Confirm? , ,
Searching
Open the menu
On the handset to be registered:
, / ,
Base setting
, Open the menu
/ ,
Register
,
,
Base
Open the menu
/ ,
Base
, Select the base unit required
PIN? , Enter the PIN
2
and confirm it
Incorrect digits entered can be deleted by briefly pressing the key.
The handset searches for the base unit. This process can take up to 2 minutes.
The handset is automatically assigned an internal call number following registration. The internal
call number appears in the display.
To register handsets from other manufacturers, please refer to the operating manual
supplied with them.
1
GAP: Generic Access Profile = Standard for the interoperation of handsets and base stations/
units from different manufacturers.
2
The default PIN code is 0000".
To Next Page
Loading...
