14
15
16
Operating the Walkie−Talkies
38
4 Operating the Walkie−Talkies
Display and notation of operating sequences
P Press the button depicted
a, P Press and hold the button
depicted
b, P Release the button displayed
ð Speak into the microphone
Switching the walkie−talkie on/off
a V Switch the walkie−talkie on
An acoustic signal is issued.
The current channel setting appears in the display.
a V Switch the walkie−talkie off
Volume control
+ or , Raise or lower the volume
Transmitting and receiving
Transmitting
a P ð Transmit
Hold the walkie−talkie approx. 5 to 7 cm from your
mouth and speak at a normal volume. In order to talk to
other subscribers, the respective walkie−talkies must
be set to the same channel.
Receiving
b, P Receive
Radio signals cannot be received when the P but-
ton is being pressed.
To Next Page
Loading...
