Need help?Do you have a question about the SWR GOLIATH SENIOR and is the answer not in the manual?
General| Type | Bass Cabinet |
|---|---|
| Impedance | 8 ohms |
| Sensitivity | 105 dB SPL |
| Frequency Response | 40 Hz |
| Speaker Size | 10 inches |
Covers amplifier connection, speaker cable requirements, and Speakon jack benefits.
Details the tweeter protection fuse and the shock-mounted steel grill design.
Provides instructions for cleaning and maintaining the speaker cabinet's exterior.
Details how to use the tilt-back feature for easier transportation.
Instructions for installing and removing caster wheels on specific models.
Lists technical specs and provides an overview of the Big Ben subwoofer.
Explains how to connect, operate, and manage power for the Big Ben.
Describes the input/output jack configuration for connecting multiple enclosures.
Lists technical specs and provides an overview of the Big Bertha enclosure.
Explains how to connect, operate, and manage power for the Big Bertha.
Details input/output jacks and the tweeter attenuator control.
Describes the crossover point for dividing frequencies between drivers.
Lists technical specs and provides an overview of the Henry The 8x8 enclosure.
Explains how to connect, operate, and manage power for the Henry The 8x8.
Details input/output jacks and the tweeter attenuator control.
Describes the crossover point for dividing frequencies between drivers.
Lists technical specs and details the 10" P.A.S. drivers for the Goliath III.
Explains how to connect, operate, and manage power for the Goliath III.
Details input/output jacks and the tweeter attenuator control.
Describes the crossover point for dividing frequencies between drivers.
Lists technical specs and details the 10" P.A.S. drivers for the Goliath Junior III.
Explains how to connect, operate, and manage power for the Goliath Junior III.
Details input/output jacks and the tweeter attenuator control.
Describes the crossover point for dividing frequencies between drivers.
Lists technical specs and details the 10" P.A.S. drivers for the Goliath Senior.
Explains how to connect, operate, and manage power for the Goliath Senior.
Details input/output jacks and the tweeter attenuator control.
Describes the crossover point for dividing frequencies between drivers.
Lists technical specs and highlights additional features of the Megoliath.
Provides context on design and explains connection procedures.
Details the specific procedure for using the Megoliath in mono configuration.
Explains the procedure for using the Megoliath in stereo configuration.
Explains how to adjust the tweeter level using the attenuator control.
Describes the crossover point for dividing frequencies between drivers.
Provides guidance on how to safely transport the Megoliath enclosure.
Lists technical specs and explains connection/operation for the Son Of Bertha.
Details power handling limits and the input/output jack configuration.
Explains tweeter adjustment and the internal crossover for the Son Of Bertha.
Lists technical specs and provides an overview of the Triad 3-way system.
Explains connection, power limits, and input/output jack configuration for the Triad.
Details the tweeter attenuator control and the internal crossover for the Triad.
Lists technical specifications for the 12-Pack, including power, impedance, and drivers.
Explains how to connect and operate the 12-Pack enclosure.
Outlines power handling limits and warranty implications for the 12-Pack.
Describes the input/output jack configuration for connecting multiple enclosures.
Lists technical specifications for the 12-Stack, including power, impedance, and drivers.
Explains how to connect and operate the 12-Stack enclosure.
Outlines power handling limits and warranty implications for the 12-Stack.
Describes the input/output jack configuration for connecting multiple enclosures.
Defines key terms like impedance, ohm, and parallel operation.
Discusses questions to ask and methods for calculating total impedance for multiple cabinets.
Explains how to safely connect multiple 8 ohm enclosures to an amplifier.
Describes the harmful effects of continuous clipping on speaker components.
Addresses causes of distortion and troubleshooting steps for amp, woofer, or tweeter.
Offers solutions for intermittent distortion or crackling, often related to cables.
Explains how to test speaker cables and check speaker phasing using a battery.
Addresses issues like tinny or hollow sound, often caused by out-of-phase speakers.
Warns against removing covers due to electrical hazards.
Emphasizes reading, retaining, heeding instructions and warnings for safe operation.
Covers risks related to cleaning, liquids, ventilation, objects, and heat.
Addresses grounding, power cords, lightning, overloading, and professional servicing requirements.
Details the two-year warranty period and conditions that void the warranty.
Disclaims liability for incidental or consequential damages.
Provides a step-by-step guide for obtaining service or repair for SWR equipment.
To Next Page
