Need help?Do you have a question about the SWR WorkingPro WorkingPro 700 and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Effects Loop | Yes |
| Frequency Response | 20Hz-20kHz |
| Type | Bass Amplifier |
| Power Output | 700W |
| Inputs | 2 (1/4" and XLR) |
| Outputs | 1/4" and XLR |
| EQ | 4-band |
Boosts/cuts midrange at selected frequency.
Boosts low frequencies with compressor for low-end thickness.
Prevents power amp overdriving by controlling volume.
1/4" and Speakon® jacks for parallel speaker connections.
Match speaker impedance to amplifier for performance and safety.
Rules for connecting speakers to avoid damage and ensure operation.
Electronically balanced output for studio/FOH mixing consoles.
To Next Page