SXT Scooters Ultimate Pro - Handlebar Folding and Mounting; Folding and Unfolding Mechanism; Handlebar Assembly Attachment

1. Check the contents of the box
• Supplied with: charger (2A) and instruction manual
• A battery is already installed in the vehicle (see information sheet).
2. Folding
• Step A - Release the quick release fuse
• Step B - Press the folding lever down.
• Step C - Pull down the handlebar.
3. Unfolding
• Step A - Lower the folding lever.
• Step B - Pull up the handlebar.
• Step C - Lock the quick-release fuse
4. Attachment of the steering
• Loosen all nuts with a 5mm hex wrench and insert the handlebar assembly into the center of the rod.
Place the top aluminum disc on the bracket and tighten the 4 screws.
• Fix the screw in the order of 1 to 4 alternately and crosswise tighten the screws.
To 4.
folding lever
To 2. u. 3.
E
Folding and mounting the handlebar