SYSREMOTEUSER system table
1034
address The address to which SQL Remote messages are to be sent. The
address must be appropriate for the address_type.
frequency How frequently SQL Remote messages are sent.
send_time The next time messages are to be sent to this user.
log_send Messages are sent only to subscribers for whom log_send is
greater than log_sent.
time_sent The time the most recent message was sent to this subscriber.
log_sent The log offset for the most recently sent operation.
confirm_sent The log offset for the most recently confirmed operation
from this subscriber.
send_count How many SQL Remote messages have been sent.
resend_count Counter to ensure that messages are applied only once at
the subscriber database.
time_received The time when the most recent message was received from
this subscriber.
log_received The log offset in the subscriber’s database for the operation
that was most recently received at the current database.
confirm_received The log offset in the subscriber’s database for the most
recent operation for which a confirmation message has been sent.
receive_count How many messages have been received.
rereceive_count Counter to ensure that messages are applied only once at
the current database.
To Next Page
Loading...