Sybase Adaptive Server Anywhere - The Database Server

The database server
14
The database server
Start a personal database server or network database server.
{ dbeng7 | dbsrv7 }
[ server-switches ] [ database-file [ database-switches ] ]*
load dbsrv7 [ server-switches ] [ database-file [ database-switches ] ]*
Switch Description
@filename Read in switches from a configuration file. See "@filename
command-line option" on page 19.
@environment-
variable
Read in switches from an environment variable. See
"@environment-variable command-line option" on page 20.
-?
Display usage information. See "–? command-line option" on
page 20.
-b
Run in bulk operations mode. See "–b command-line option" on
page 20.
-c size Set initial cache size. See "–c command-line option" on page 21.
-ca 0
Disable dynamic cache sizing [Windows NT, Windows 95/98,
UNIX]. See "–ca command-line option" on page 22.
-ch size Set the cache size upper limit [Windows NT, Windows 95/98].
See "–ch command-line option" on page 23.
-cl
Set the cache size lower limit [Windows NT]. See "–cl
command-line option" on page 23.
-cs
Display cache usage in database server window. See "–cs
command-line option" on page 23.
-ct
Enable character-set translation [Not NetWare or Windows CE].
See "–ct command-line option" on page 24.
-d
Disable asynchronous I/O [Windows NT, NetWare]. See "–d
command-line option" on page 24.
-e
Enable packet encryption [network server]. See "–e command-
line option" on page 24.
-ga
Automatically unload the database after the last connection
closed. In addition, shut down after the last database is closed
[Not NetWare]. See "–ga command-line option" on page 24.
-gb level Set database process priority class to level [Windows NT]. See "–
gb command-line option" on page 25.
-gc num Set maximum checkpoint timeout period to num minutes. See "–
gc command-line option" on page 25.
Function
Syntax
NetWare syntax