Sybase Adaptive Server Anywhere - Page 68

Connection parameters
50
AutoStop connection parameter [Astop]
To prevent a database from being stopped as soon as there are no more open
connections.
Embedded databases
Yes
By default, any server that is started from a connection string is stopped
when there are no more connections to it. Also, any database that is loaded
from a connection string is unloaded as soon as there are no more
connections to it. This behavior is equivalent to Autostop=Yes.
If you supply Autostop=No, any database that you start in that connection
remains running when there are no more connections to it. As a consequence,
the database server remains operational as well.
The AutoStop parameter is used only if you are connecting to a database that
is not currently running. It is ignored if the database is already started.
BroadcastListener parameter
TCP/IP, Server side
YES, NO
YES
"–sb command-line option" on page 34
This option allows you to turn broadcast listening OFF for this port.
BroadcastListener=0 is the same as
-sb 0.
Start a server that accepts both TCP/IP and SPX connections, but require that
TCP/IP connections use DoBroadcast=NO:
dbsrv8 -x tcpip(BroadcastListener=NO),spx ...
CharSet connection parameter [CS]
To specify the character set to be used on this connection.
Anywhere
The local character set. For information on how this is determined, see
"Determining locale information" on page 320 of the book ASA User’s
Guide.
Function
Usage
Default
Description
Usage
Allowed values
Default
See also
Description
Examples
Function
Usage
Default