What to do if my SybronEndo Apex ID Dental equipment powers on, but no measurements show?
If your SybronEndo Dental equipment powers on but doesn't display measurements, the probe cord might be disconnected from the main unit. Ensure that the probe cord is securely connected to the main unit.
How to fix a SybronEndo Apex ID Dental equipment with no power?
If your SybronEndo Dental equipment has no power, here are a couple of things to check: * **Low or No Battery:** The most common reason is depleted batteries. Replace the batteries with new ones. * **Connection Issue:** If replacing the batteries doesn't solve the problem, inspect the battery connections to ensure they are secure and properly aligned.
What to do if my SybronEndo Apex ID is on but not measuring?
If your SybronEndo Dental equipment powers on but doesn't measure, the file holder might be disconnected from the probe cord. Check the connection between the file holder and the probe cord to ensure they are properly connected.
What to do if my SybronEndo Measuring Instruments power is on, but no measurements show?
How to fix a SybronEndo Measuring Instruments with no power?
General| Type | Apex Locator |
|---|---|
| Manufacturer | SybronEndo |
| Model | Apex ID |
| Power Source | Battery |
| Display | LCD |
| Battery Type | Lithium-ion |
| Operating Conditions | 10°C to 40°C, 30% to 75% RH |
| Storage Conditions | -10°C to 50°C, 10% to 90% RH |
| Technology | Multi-Frequency Technology |
To Next Page
