Syclone LGR145 - Parts Identification; Positioning a Dehumidifier; Operating Your Dehumidifier

PARTS IDENTIFICATION
OPERATING YOUR DEHUMIDIFIER
Set unit upright
NOTICE: Transporting or storing the unit in a
horizontal position is not recommended. When the
machine is placed in a horizontal position, the oil
from the compressor can flow into the refrigerant
coils and reduce the ability of the dehumidifier to
function and possibly damage the unit. If the unit
has been placed in a horizontal position, set it
upright and let it stand for at least 30 minutes before
turning it on.
Positioning a Dehumidifier
For best results, operate your dehumidifiers in an
enclosed area. Close all doors and windows that open to
the outside to maximize the unit’s water removal
efficiency. Place your dehumidifier away from
obstructions, and keep it away from anything that could
block airflow into and out of the unit. For more
information about creating an optimum drying
FIG. A: FRONT
FIG. C: POWER
ATTACHMENT POINT
Molded pocket
for cord storage.
Humid air inlet.
3M™ HAF filter.
Process (dehumidified)
air outlet. May be used
with standard 12 in.
rigid or layflat ducting.
Drain hose pocket.
Integrated handle.
Folds for storage.
Back panel. Remove to
access the pump.
Power cord socket.
Control panel.
Drain hose location.
Product label and
serial number.
07-01922C F532-120V 2015-03 Warranty 07-01939 2 Aramsco