Do you have a question about the sylber ARTU Bx 11 MTN and is the answer not in the manual?
Efficiency Class | A |
---|---|
Heat output (50/30°C) | 11.1 kW |
Fuel Type | Natural gas / LPG |
Type | Wall-mounted condensing boiler |
Power | 220-240 V, 50 Hz |
Comprehensive summary of critical safety instructions for operation and installation.
Details on appliance components, maximum dimensions, and connection points.
Explanation of the internal water flow and circuit diagram.
Diagram illustrating the appliance's electrical wiring layout.
Regulations and standards governing gas appliance installation.
Guidelines for selecting an appropriate installation location and required clearances.
Instructions for securely mounting the appliance to a wall.
Requirements for adequate ventilation in the installation room.
Information on connecting the appliance's battery power supply.
Procedures and safety checks for making gas connections.
Explanation of the flue gas safety device and troubleshooting error E7.
Steps for connecting the appliance to the water mains, including inlet/outlet identification.
Instructions on how to drain the water heater.
Detailed procedure for converting the appliance between different gas types.
Information on factory settings and adjustments by qualified technicians.
Overview of the appliance's control panel and buttons.
Explanation of the symbols and icons displayed on the appliance.
Basic principles of how the hot water heater operates.
Step-by-step guide on how to use the appliance for hot water.
Instructions on adjusting the domestic hot water temperature setting.
Information on error codes and how to reset the appliance after a fault.
Procedure for temporarily turning off the appliance.
Steps to take when the appliance will not be used for a long time.
Accessing and navigating the technician's parameter menu.
Detailed table listing adjustable parameters and their settings.
Annual inspection and cleaning recommendations for optimal operation and safety.
Step-by-step guide on how to safely remove the appliance's outer casing.
Guide to identifying common faults and their corresponding solutions.
Detailed technical data, dimensions, and performance characteristics of the appliance.
Statement of compliance with relevant EU directives and regulations.