Introducon
TheSBT1100Bluetooth FM Transmier ulizes
Bluetooth 3.0 technology and equips three USB
ports: one for USB music file playing; two
designed for charging (IOS and Android devices).
Moreover, it supports TF card and AUX Input.
SBT1100provides mul-soluons for your
hands-free driving and in-car stereo streaming.
Smart phone can be connected to SBT1100
through Bluetooth and stream through car FM
system.
Product Diagram
① Display screen ⑦ Answer the call/pause
② Frequency (channel) down Next /volume up
③ Mul-funcon buon ⑧ USB port(for reading file)
④ Frequency (channel) up ⑨ TF card slot
⑤ Hang up/power off ⑩
Aux input /Aux output
Previous /volume down ⑪ Charger USB1
⑥ Microphone ⑫ Charger USB2
Car FM Transmitter
User Guide
BF18
SBT1100
SYLVANIA
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
.
To assure continued operation, follow the attached installation instructions and
use only shield cables when connecting to other devices. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
2ANH7-SBT1100
To Next Page
Need help?
General