Straighten your fingers, stand your palms vertically
and put your hands in.
Do not put your hands in horizontally or with your fingers bent.
If you want to adjust the position of the arm (arm unit)
When returning the footrest to its original position, avoid applying force
to the soles of the feet. If the footrest is moved back to position when
the springs are extended, the sole part might hit the floor and then it
won`t be possible to smoothly put the footrest back into position.
You can adjust the position by sliding the arm part
when the backrest is tilted. After the backrest is tilted,
slide the arm part towards the backrest (manual).
The larger the tilt angle of the backrest, the further the
arm can be slid to the side of the back cushion. When
the backrest is in the stowed position (completely
upright), the arm cannot be slid.
Usage of the arm part
21
To Next Page
Loading...
