J
James NguyenAug 3, 2025
What to do if my Synca Massager chair stops halfway and the remote doesn't work?
- BBrandon BuchananAug 3, 2025
If your Synca Massager chair stops unexpectedly and the remote isn't working, it might be due to the chair being too close to a wall or other object. Ensure there's enough space around the chair. Then, switch the power off and on again using the switch located at the lower part behind the main body. Another potential cause is pressure on the knead balls. Briefly detach your body from the backrest, then turn the power off and on again before restarting the massage.